-
0,26 € netto
The offered product is a set consisting of a complete OLT MA5800-X7 terminal and a 16-port board H907CGHF. The set also includes PON transceivers!
The MA5800 is the industry's first smart aggregation OLT with a distributed architecture. It is positioned as the next-generation OLT for NG-PON. The product is designed to help carriers build networks with larger bandwidths, higher speeds, and smarter connectivity to deliver better service experience.
Providing GPON, 10G PON(including XG-PON and XGS-PON), P2P 10GE/GE access, the MA5800 supports deployment on FTTH, FTTD, FTTB, and FTTC networks. This makes it applicable to home access, enterprise access, mobile backhaul, and Wi-Fi hotspot backhaul scenarios to aggregate all services on one fiber network.
The MA5800 functions as a large-capacity aggregation device on the network to aggregate the traffic from ONTs, MDUs, and campus switches, thereby simplifying the network architecture and reducing the OPEX.
Huawei H907CGHF is a Combo board that combines GPON and XG-PON transmissions, designed for OLT MA5800 terminals. Contrary to the Flex-type boards, this one can transmit both transmissions simultaneously on each port, thanks to which, when connecting the subscriber, you decide which client terminal to install - both GPON and XG-PON will work. CGHF is equipped with 16 SFP slots, the set includes N2a class inserts.
GPON transmission has a throughput of 2.5 Gb/s when downloading data and 1.25 Gb/s when sending. The maximum split is 1: 128 - 128 subscribers can be connected to each port. XG-PON technology achieves 10 Gb/s download bandwidth and 2.5 Gb/s upload bandwidth. In addition to the bandwidth, the maximum split is also increased, which is 1: 256 - a maximum of 256 subscribers per port.
Specifications
MA5800-X7 | |
Physical Specifications | |
---|---|
Supported cabinet |
N63E-22 N66E-22 |
Maximum weight (including mounting brackets) | 26 kg |
Maximum input current | 40 A |
Power supply mode | DC power support (dual for backup) |
Working voltage range | -38.4 V DC to -72 V DC |
Rated voltage | -48V / -60V |
Ambient temperature |
-40°C to +65°C* The MA5800 can start up at a lowest temperature of ?25°C . *The +65°C temperature refers to the highest temperature measured at the air intake vent. |
Ambient humidity | 5% RH to 95% RH |
Maximum Number of Ports in a Subrack (full configuration) |
|
GPON ports | 112 |
XG-PON ports | 112 |
XGS-PON ports | 112 |
10GE/GE ports | 168 |
GE/FE ports | 336 |
System Specifications | |
Switching capacity of thecontrol board (load sharing mode) |
MPLA: 3.6 Tbit/s MPLB: 7 Tbit/ |
Maximum bandwidth per service slot (load sharing mode) |
MPLA: 100 Gbit/s MPLB: 200 Gbit/s |
Maximum number of concurrent 4K video users | 8000 |
Maximum number of MAC address | 262143 |
Maximum number of IPv4 routing tables | 65536 |
Maximum number of IPv6 routing tables | 16384 |
Maximum number of ARP tables |
Before the V100R017C10 version: 66048 V100R017C10 version: 98816 V100R018C00 and later versions: 131072 |
Switching / Forwarding delay | Short forwarding delay: The 100 Mbit/s Ethernet port sends the 64-byte Ethernet packets at a delay shorter than 20 ?s |
Bit error rate (BER) in full load | A BER smaller than 10 e-7 for a port that transmits data in full load |
Primary Features | |
Layer 2 features |
VLAN+MAC forwarding SVLAN+CVLAN forwarding PPPoE+ DHCP option82 |
Layer 3 features |
Static route RIP/RIPng OSPF/OSPFv3 IS-IS BGP/BGP4+ ARP DHCP relay VRF |
MPLS&PWE3 |
MPLS LDP MPLS RSVP-TE MPLS OAM MPLS BGP IP VPN Tunnel protection switching TDM/ETH PWE3 PW protection switching |
QoS |
Traffic classification Priority processing trTCM-based traffic policing WRED Traffic shaping HQoS PQ/WRR/PQ+WRR ACL |
Multicast |
IGMP v2/v3 IGMP proxy/snooping MLD v1/v2(V100R016C10 and later versions) MLD Proxy/Snooping(V100R016C10 and later versions) VLAN-based IPTV multicast IPv4 PIMand PIM-SSM(V100R017C00 and later versions) |
IPv6 |
IPv4/IPv6 dual stack IPv6 L2 and L3 forwarding DHCPv6 relay |
System reliability |
GPON type B/type C protection 10G GPON type B protection BFD(V100R016C10 and later versions) ERPS (G.8032) MSTP Monitor Link(V100R018C10 and later versions) Intra-board and inter-board LAG In-service software upgrade (ISSU) of the control board 2 control boards and 2 power boards for redundancy protection In-service board fault detection and rectification Service overload control |
Eco-friendly and energy-saving | In compliance with the Code of Conduct v5 released by the European Commission |
VXLAN (V100R018C00 and later versions) | Virtual eXtensibleLAN |
SRv6 (V100R019C10 and later versions) | Segment Routing IPv6 |
Standards Compliance | |
EMC standards |
IEC 61000-3-2 IEC 61000-3-3 IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 IEC 61000-4-5 IEC 61000-4-6 IEC 61000-4-11 IEC 61000-4-29 EN 61000-3-2 EN 61000-3-3 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-2 ETSI ES 201 468 ETSI EN 300 386 ETSI EN 300 132-2 ETSI EN 300 253 VCCI V-3 EN 55024 EN 55032 ITU-T K.20 CISPR 24 CISPR 32 ITU-T K.11 ITU-T K.20 ITU-T K.44 |
Environment protection standards |
2011/65/EU (RoHS) EN 50581:2012 EC NO. 1907/2006 (REACH) 2012/19/EU (WEEE) |
Environment standards |
ETS 300 019 1-1 ETS 300 019 1-2 ETS 300 019 1-3 ETS 300 019 2-1 ETS 300 019 2-2 IEC 60068-2 IEC 60721-2-6 IEC 60721-3-1 IEC 60721-3-2 IEC 60721-3-3 ETSI EN 300 753 |
Security standards |
EN 60950-1 EN 60825-1 EN 60825-2 IEC 60825-1 IEC 60825-2 IEC 60950-1 |
Reliability standards |
MIL-HDBK-217F BELLCORE TR-332/SR-332 |
PON interface standards |
ITU-T G.984.1 ITU-T G.984.2 ITU-T G.984.3 ITU-T G.984.4 ITU-T G.987.1 ITU-T G.987.2 ITU-T G.987.3 ITU-T G.988 ITU-T G.9807.1 |
H901MPLB control / upstream board | |
Bandwidth per slot (load balancing mode) | 200 Gbit/s |
Upstream or cascading port | 4 x 10GE/GE ports |
ALM port | No |
BITS/TOD port | No |
MAC address table size | 262143 |
Access ONTs | 17408 |
Multicast users | 17408 |
Static programs | 4096 (earlier than V100R017C00) 8192 (V100R017C00 and later versions) |
Online programs |
V100R016C00: 4000 - IPv4: 4000 V100R017C10 and later versions: - IPv4: 8000 |
IPv4 routing table size | 65536 |
IPv6 routing table size | 16384 |
Service ports | 139264 |
ND table size | 16384 |
ARP table size | 66048 (earlier than V100R017C10) 98816 (V100R017C10) 131072 (V100R018C00 and later versions) |
Ethernet synchronization | Yes |
1588v2 | Yes |
1588ACR | Yes |
D-CCAP | Yes |
H907CGHF | |
Wavelength |
GPON: Tx: 1490 nm Rx: 1310 nm
XG-PON: Tx: 1577 nm Rx: 1270 nm |
Encapsulation type | SFP |
Port rate |
GPON: Tx: 2,488 Gb/s Rx: 1,244 Gb/s
XG-PON: Tx: 9,953 Gb/s Rx: 2,488 Gb/s |
Minimum output optical power |
GPON: 3 dBm XG-PON: 4 dBm |
Maximum output optical power |
GPON: 7 dBm XG-PON: 8 dBm |
Maximum receiver senstivitiy |
GPON: -32 dBm XG-PON: -29,5 dBm |
Connector type | SC/UPC |
Compatible fiber type | Singlemode |
Overload optical power |
GPON: -12 dBm XG-PON: -9 dBm |
Extinction ratio | 8,2 dB |
Forwarding capability | 200 Gb/s |
Rate mode | Asymmetric |
T-CONTs per PON port |
GPON: 1024 XG-PON: 2048 |
Service flows per PON | 16352 |
Maximum frame size |
2052 B 9216 B (Jumbo frames enabled) |
Maximum number of MAC addresses | 131072 |
Max distance between ONUs under the same PON | 40 km |
Dimensions | 23,30 x 257,90 x 399,20 mm |
Power consumption |
Static: 48 W Maximum: 106 W |
Operating temperature | -40°C to +65°C |