-
0,25 € netto
Opton RF-WDM55-A-D is an active CATV converter designed for PON networks. It can be used in both EPON and GPON technology. It has two SC / APC connectors, one connects the signal from OLT / EDFA, and the other ONU / ONT terminal. There is a passthrough between the ports, which bridges the signal transmitted through the 1310 and 1490 nm channels (i.e. those used by the OLT terminal). The device itself operates at a wavelength of 1550 nm and converts the fiber optic signal to RF (antenna).
The offered product allows the subscriber to be connected to CATV without the need to use an ONT terminal with an RF connector. This is very useful, for example, in a situation where the client already has a regular terminal and decides to extend the contract. You do not need to install a new terminal then, just use the RF-WDM55-SA-D converter. The product has two antenna connectors, so your customer can connect more than one device.
The device at the RF output transmits a signal with a large range: 47 - 862 MHz. It has a metal casing, thanks to which it is protected against the influence of external interference from, for example, mobile phones. The output power (level) is 97 dBµV in total (Pin -3 dBm). The range of received optical power is 2 ~ -10 dBm.
The most important features:
- active CATV converter;
- work in the 1550 nm band;
- passthrough wavelengths of 1310 and 1490 nm;
- compatibility with PON technology;
- two RF outputs;
- 47 - 862 MHz band;
- power supply 12 V DC 0.5 A.
Specifications
RF-WDM55-SA-D | |
Optical properties | |
---|---|
CATV Wavelenght | 1550 nm |
PON passthrough | 1310 i 1490 nm Waves |
Isolation on channels 1490 & 1550 | ≥ 40 dB |
Sensitivity |
1310 nm: ≥ 0,85 A/W 1550 nm: ≥ 0,9 A/W |
Receiving power |
Analogue TV (CNR>45dB): 2 ~ -10 dBm Digital TV (MED>29dB): 2 ~ -20 dBm |
Return loss | ≥ 55 dB |
Connector | SC/APC |
RF parameters | |
Frequency | 47 - 862 MHz |
Output level |
97 dBµV Analogue TV Pin = -3 dBm Digital TV Pin = -5 dBM |
Regulation of output level |
0 - 18 dB MGC |
Return loss | ≥ 14 dB |
Output ressistance | 75 Ω |
Number of output ports | 2 |
Connector | F female |
Analog TV connection properties | |
Test chanel | 59 CH (PAL-D) |
OMI | 3,8% |
CNR1 |
≥ 54,9 dB Pin = -2 dBm |
CNR2 |
≥ 45,2 dB Pin = -10 dBm |
CTB |
≤ -65 dB Pin: 0 ~ -10 dBm |
CSO |
≤ -63 dB Pin: 0 ~ -10 dBm |
Digital TV connection properties | |
OMI | 4,3% |
MER |
≥ 36 dB Pin = -15 dBm ≥ 28 dB Pin = -19 dBm |
BER |
< 1.0E-9 dB Pin: 2 ~ -14 dBm |
General properties | |
Power method |
12 V DC 0,5 A |
Maximum power consumption | 5,5 W |
Permissible operating temperature | from -20 to 55 C |
Permissible storage temperature | from -40 to 85 C |
Permissible air humidity | 5%-95% |
Dimenssions | 86x50x22 mm |