YOFC Z-XOTKtsdDb duct fiber optic cable 24J 2T12F, G.652.D, 2 kN

YOFC Z-XOTKtsdDb duct fiber optic cable 24J 2T12F, G.652.D, 2 kN

Marca: YOFC

Código de producto: YC-Z-XOTKTSDDB-24

Número de catálogo: 9520

Garantía (meses):

Precio

1,67 zł

2,05 zł IVA incluido

favoriteAñadir a la lista de deseos

Descripción

Oversized transport

The cable is originally wound on a roll of 4.5 km - there is the possibility of rewinding (a smaller section of the cable on another roll), the cost of the rewinding (the drum is included): 25 €

YOFC Z-XOTKtsdDb is a fiber optic cable designed for installation in telecommunication ducts. It is equipped with 24 G.652.D fibers (single mode) placed in 2 tubes. The tubes and fillers are twisted around a central reinforcing element, and the whole structure has additional circumferential reinforcement in the form of glass fibers. The tensile strength is 2 kN, making the cable suitable for mechanical pulling. The outer sheath, 1.1 mm thick, is made of HDPE. The outer diameter of the cable is 8.3 mm, and it weighs 60 kg/km.

The offered product is best suited for telecommunication ducts, especially in main routes. Thanks to its high tensile strength, it can be easily mechanically pulled over long distances. The use of G.652.D fiber is characterized by low attenuation.

Cable construction

The cable is characterized by a multi-tube construction, where the tubes and fillers are twisted around a central reinforcing element - an FRP rod. This design makes the cable rigid, preventing the fibers from moving or shifting due to temperature fluctuations.

Furthermore, the entire structure has been additionally strengthened circumferentially with glass fibers to increase its tensile strength. Additionally, two ripcords have been placed in the sheath to facilitate its splitting.

Duct installation

The offered product is fully adapted for installation in telecommunication ducts. The HDPE sheath is abrasion-resistant and will not be damaged during pulling. The circumferentially placed glass fiber additionally protects the cable from rodent attacks.

The maximum tensile force of the cable is 2 kN, so there is no need to worry about damage during pulling. The multi-tube construction further enhances the durability of the optical fiber and facilitates installation work.

24 fibers (2 tubes, 4 fillers)

The Z-XOTKtsdDb has 24 single-mode fibers of the G.652.D type placed in 2 tubes (12 fibers per tube). The outer diameter of the cable is 8.3 mm, and it weighs 60 kg/km.

The sheath is made of durable HDPE, with a thickness of 1.1 mm. The cable has been designed for outdoor installation, with a CPR class of Fca.

G.652.D (Singlemode) fiber

The fiber optic cable has been equipped with G.652.D single-mode fibers. This type of fiber is distinguished by low attenuation, which is ≤ 0.35 dB/km for the 1310 nm wave and ≤ 0.21 dB/km for the 1550 nm wave. These low losses have been achieved at the expense of less flexibility compared to G.657.A2 / G.657.B3 type fibers.

Thanks to these parameters, cables equipped with G.652.D fibers are best suited for use in main routes. In such applications, lower flexibility is not a disadvantage. Additionally, for transmissions over long distances, the overall attenuation will be significantly lower compared to other types of fibers.

Specifications

Mechanical
YOFC Z-XOTKtsdDb 24
Fiber quantity	24
Fiber type	G.652.D
Maximum fiber attenuation at 1310 nm	≤ 0,35 dB/km
Maximum fiber attenuation at 1550 nm	≤ 0,21 dB/km
Total quantity of tubes and fillers	6
Fibers per tube	12
Central strength member	FRP rod
Water blocking material	Water blocking tape & yarn
Peripheral strength member	Glass yarns
Material of outer sheath	HDPE
Color of outer sheath	Black
Thickness of outer sheath	1,1 mm
Number of ripcords	2
Cable diameter	8,3 mm
Cable weight	60 kg/km
Tensile strength	2000 N
Minimum bending radius	Static: 10x diameter Dynamic: 20x diameter
Colors	1: red 2: green 3: blue 4: yellow 5: white 6: gray 7: brown 8: purple 9: aqua 10: black 11: orange 12: pink
Tension	Standard: IEC 60794-1-21-E1 Load: 2 kN Duration time: 1 min Additional attenuation: ≤ 0,05 dB/km
Crush	Standard: IEC 60794-1-21-E3A Load: 1000 N / 100 mm Duration time: 1 min Additional attenuation: ≤ 0,05 dB/km
Impact	Standard: IEC 60794-1-21-E4 R=300 mm, 10 J in 3 different places Additional attenuation: ≤ 0,1 dB/km
Repeat Bending	Standard: IEC 60794-1-21-E6 Radius: 20 x diameter, 25 cycles Load 150 N Additional attenuation: ≤ 0,1 dB/km
Torsion	Standard: IEC 60794-1-21-E7 Length under test: 1 m 10 cycles, turns: 180° Load: 150 N Additional attenuation: ≤ 0,1 dB/km
Water Penetration	Standard: IEC 60794-1-22-F5 Sample length: 3 m Water height: 1 m, duration time: 24 h Result: No water leakage
Temperatura Cycling	Standard: IEC 60794-1-22-F1 Temperature -40° ~ 70° C Duration time: 12 h Attenuation change: ≤ 0,05 dB/km after test