-
Kč
Ubiquiti G6 Pro Bullet is an IP camera designed to operate under the UniFi Protect system. It supports 4K resolution (8 MP) and provides very good image quality. The manufacturer used a varifocal lens of 5.9–13.8 mm, which allows the use of optical zoom (2.36x magnification). A 1/1.2" CMOS sensor was used, which stands out for good quality in low-light conditions, resulting in better image quality in poor lighting and at the same time a good night mode range (40 m). The camera supports a Multi-TOPS AI engine, which enables the use of advanced image analysis functions, including face recognition and license plate recognition. The housing is fully adapted for outdoor use, with a protection rating of IP66. Using the accessories included in the G6 Pro Bullet set, you can mount it on a wall, ceiling, or pole. The camera is equipped with a 1G Ethernet port, which also serves as a PoE+ (802.3at) power input, and the maximum power consumption is 15 W.
8 MP (4K) camera
The offered product is an IP camera equipped with an 8 MP lens supporting 4K resolution. It provides very good image quality and allows you to see significantly more details than HD / 2K cameras.


5.9–13.8 mm lens (2.36x optical zoom)
The device has a varifocal lens of 5.9–13.8 mm, which allows the use of optical zoom (2.36x). The zoom makes it possible to focus the image on a specific area and is also useful if you want to mount the camera at a large distance from the place to be recorded. The field of view is 113.8° horizontally and 61.9° vertically (134° diagonal) in wide-angle mode, and 45.5° horizontally and 25.8° vertically (52° diagonal) in telephoto mode.
UniFi Protect
G6 Pro Bullet is a camera designed to operate under the UniFi Protect system. It requires adoption in the control panel and the use of a recorder compatible with UniFi or a gateway with recorder functionality. You can conveniently manage the camera from the same panel as access points and other devices from the wide range of Ubiquiti UniFi solutions.


Advanced software features
The camera supports the Multi-TOPS AI engine and provides advanced image analysis functions. It enables face recognition and license plate reading. This allows you, from the UniFi Protect panel, to have additional options for analyzing and searching for people and vehicles recorded. In addition, the G6 Pro Bullet also supports basic smart detection functions – recognizing people, vehicles, and animals.
Good low-light performance
Thanks to the use of a 1/1.2" sensor, the camera performs very well in low-light conditions, providing a significantly better image than devices equipped with 1/2.3" or 1/3" sensors. The manufacturer used a bright lens with a range of ƒ/1.5–ƒ/2.9, which further improves recording at night or at dusk. The G6 Pro Bullet also stands out with a very good IR night mode range – up to 40 m.


Microphone, speaker, microSD slot
The camera is equipped with a microSD slot, where you can insert a memory card and then save recordings on it, without the need for a hard drive. The integrated microphone and speaker allow you to conduct two-way voice communication and additionally record sound, not just video.
For outdoor use
The housing is fully adapted for outdoor use and has an IP66 protection rating. Using the accessories included in the set, you can mount the camera on a pole or on a wall/ceiling.


1G Ethernet port with PoE+ power
The device has a 1G Ethernet port, which also serves as a PoE+ (802.3at) power input. Power cannot be supplied in any other way than via PoE, and the maximum power consumption is 15 W.
Specifications
| Ubiquiti UVC-G6-Pro-Bullet-W | |
| Overview | |
|---|---|
| Dimensions |
Without mount: Ø85.8 x 106.2 mm (Ø3.4 x 4.2") With wall mount: Ø85.8 x 210 mm (Ø3.4 x 8.3") |
| IR Night Vision |
40 m (131 ft) Up to 60 m (197 ft) with Vision Enhancer |
| Zoom mode | 2.36x Optical |
| Face Recognition | Yes |
| License Plate Recognition | Yes |
| Smart Detections (People, Vehicles, Animals) | Yes |
| Resolution | 4K |
| Field of View |
Wide: H: 113.8°, V: 61.9°, D: 134° Tele: H: 45.5°, V: 25.8°, D: 52° |
| Audio | Two-way audio |
| Weatherproofing | IP66 |
| Tamper Resistance | IK04 |
| Mounting |
Wall, Ceiling, Pole mount (Included) Junction Box, Angled Base (Optional) |
| UniFi Application Suite | Protect |
| Performance | |
| Networking Interface | GbE RJ45 port |
| Image Settings | Color, brightness, sharpness, contrast, white balance, exposure control, 2DNR, 3DNR, NR by motion, masking, text overlay, HDR |
| Max. Frame Rate | 30 FPS |
| Resolution | 8MP 3840 x 2160 (16:9) |
| Sensor | 1/1.2" 8MP |
| Lens | F 5.9-13.8 mm; ƒ/1.5-ƒ/2.9 |
| Night Mode | Built-in adaptive IR LED illumination and IR cut filter |
| Hardware | |
| Max. Power Consumption | 15 W |
| Supported Voltage Range | 37 - 57 V DC |
| Power Method | PoE+ (802.at) |
| Processor | Quad core Arm® Cortex®-A53 based chip |
| Pole Mount Diameter | 38 - 50 mm (1.5–2") |
| Weight |
Without mount: 755 g (1.7 lb) With mount: 980 g (2.2 lb) |
| Enclosure Material | Polycarbonate, aluminum alloy |
| Mount Material |
Wall mount: aluminum alloy, polycarbonate Pole mount: aluminum alloy |
| Expansion Slot | MicroSD card |
| Button | (1) Factory-reset |
| Ambient Operating Temperature | -20 to 50º C (-4 to 122º F) |
| Ambient Operating Humidity | 0 to 90% noncondensing |
| NDAA Compliant | Yes |





