Ubiquiti Gate Access Starter Kit

Ubiquiti Gate Access Starter Kit

Marca: Ubiquiti Networks

Código de producto: UQ-UA-SK-GATE

Número de catálogo: 10127

Garantía (meses):

Precio

610,29 €

750,66 € IVA incluido

favoriteAñadir a la lista de deseos

Descripción

The Ubiquiti Gate Access Starter Kit is a starter set designed to control a gate within the UniFi Access system. The kit includes a hub, intercom, PoE++ power adapter, and a PoE extender. The hub has connectors for connecting the gate and its open/close sensors. It features 5 Gigabit Ethernet ports, with the first providing PoE++ input and the remaining 4 offering PoE+ output. The set comes with a compatible power adapter, so you don’t need a switch that supports PoE++. The PoE extender helps if the gate is located at a significant distance from the building. The PoE+ output ports allow you to connect the intercom directly and up to 2 IP cameras. The starter kit enables the automation of the gate, which can be opened using the UniFi Identity app, NFC card, or PIN code. The intercom also supports video calls, which guests can use. Optionally, you can install compatible UVC AI series cameras that will read license plates; once a recognized plate from the list is detected, the gate will open automatically.

UniFi Access Gate Control Kit

The kit is designed for controlling the opening of a gate or barrier, depending on the place of use. It is ideal for corporate buildings that have networks based on UniFi solutions, but individual users will also appreciate it. With the accessories included in the kit, you can open the gate using the UniFi Identity app, NFC card, or PIN code. Visitors can also make a call requesting the gate to be opened.

AI Camera Connectivity

You can connect UVC AI series cameras to the hub, which will enable the reading of license plates from incoming vehicles. Once a previously defined vehicle is recognized, the gate will open automatically without the need to use the intercom.

UA-Hub-Gate

The kit includes a Hub equipped with connectors for connecting the gate, as well as 5 Gigabit Ethernet ports. The first port features a PoE++ power input, and an appropriate power adapter is included with the device. The remaining 4 ports provide PoE+ power output. This allows you to connect the intercom and cameras directly to the Hub without the need for additional power adapters or PoE switches.

The device's casing is designed for DIN rail mounting, and the Hub should be used indoors. If you plan to install it outdoors, you must use an additional weatherproof box or enclosure.

UA-Intercom

The intercom features a 7" touchscreen, built-in microphone, speaker, and an 8 MP (4K) camera. It supports two-way voice communication, and visitors can use a button to make a call. The camera allows monitoring of the area in front of the gate and helps verify visitors. A numeric keypad is included for entering PIN codes, and most settings can be selected via the touchscreen. Additionally, the intercom has an integrated NFC reader.

The casing is designed for outdoor use (IP65 protection rating). The device should be mounted on a wall, with an Ethernet port on the back that also serves as the power input.

PoE Extender Included

The included PoE extender allows you to extend the PoE range by using a 2-wire power cable. One part of the extender serves as the PoE input, while the other acts as the output, to which the target device should be connected. A high-quality, properly gauged 2-wire cable can carry power over long distances, which is especially useful if the intercom is located far from the building where the hub is installed.

Specifications

UA-Hub-Gate
Ubiquiti UA-SK-Gate
Mechanical
Dimensions	175 x 126 x 26 mm (6.9 x 5 x 1")
Weight	460 g (1 lb)
Enclosure material	Polycarbonate
Mounting	Din-rail (Included)
Hardware
Networking interface	(5) 10/100/1000 Base-T
Power method	PoE++
Max. power consumption	Without PoE output: 22W With PoE output: 50W
PoE input	50 V DC, 1 A
PoE output	PoE passthrough, (4) PoE, 50V DC, Max. 28W
Button	(1) Factory-reset
Digital input	Gate exit request, gate position, side door exit request, side door position, emergency
Dry output relay	(2) Operator: rated 30V DC, up to 1A (1) Aux: rated 30V DC, up to 1A
Powered output relay	Side door lock: 12V DC, up to 1A
Operating environment	Indoor use only with device itself Outdoor use with waterproof junction box
Ambient operating temperature	-30 to 60° C (-22 to 104° F)
Ambient operating humidity	5 to 90% noncondensing
LEDs
PoE in	Steady white: Pending adoption Steady blue: Adopted, device is ready Blinking white/blue: Upgrading firmware
PoE out	Off: Not connected or no data link Steady white: Connected and data link on
Input terminals	Off: No wire Steady white: Wire connected Blinking white: Active signal
Output relays	Off: No wire Steady white: Wire connected Blinking white: Relay triggered
UA-Intercom
Mechanical
Dimensions	324.8 x 113.7 x 28.3 mm (12.8 x 4.5 x 1.1")
Weight	Device: 965 g (2.1 lb) Bracket: 445 g (1 lb)
Enclosure material	Aluminum alloy, UV-stabilized polycarbonate, glass
Mount material	Powder-coated stainless steel
Mounting	Wall mount, adapter to the gooseneck pedestal (Included) Surface angle mount, flush mount (Optional) Sunshield kit (Optional)
Weatherproofing	IP65
Hardware
Networking interface	(1) GbE RJ45 port
Connectivity	Bluetooth 4.2 NFC
Power method	PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU
Supported voltage range	48 V DC
Max. power consumption	13 W
ESD/EMP protection	Air: ±15kV, contact: ±8kV
Sensors	Proximity sensor ALS sensor
Camera	3264 x 2448, 8 MP H: 79.4°, V: 97.5°, D: 118.2°
Display	177 mm (7") diagonal
Resolution	1024 x 600 (16:9)
Display luminance	Max. 1000 nits (typical)
Touch screen technology	Capacitive multi-touch
Microphone	Yes
Speaker	(1) 4 ohm, 2W
LEDs	(1) LCM low temperature indicator: orange (LCM turned off when it’s below -25° C but the system funtions normally) (1) LED floodlight (13) Keypad LED backlight
Button	(1) Factory-reset
NFC frequency	13.56 MHz
NFC read range	< 30 mm
NFC standards	ISO 14443A, 14443B, 15693
NFC technology	NFC Tag 1,2,3,4,5 MIFARE Classic MIFARE Plus MIFARE Ultralight MIFARE DESFire
Ambient operating temperature	Device: -30 to 60° C (-22 to 140° F) Display:* -25 to 60° C (-13 to 140° F) *The display will turn off when the ambient temperature is above/below the display operation temperature, but other functions will remain functional. (Effective after firmware v 1.0.66)
Operating environment	Outdoor use
Ambient operating humidity	5 to 90% noncondensing
UACC-Extender-2Wire-PoE-Tx/Rx
Mechanical
Dimensions	40 x 105 x 25 mm (1.6 x 4.1 x 1")
Weight	PoE in: 77 g (2.7 oz) PoE out: 79 g (2.8 oz)
Enclosure material	Polycarbonate
Mounting material	Polycarbonate
Hardware
Networking interface	1) 10/100 MbE (1) Homeplug AV
Power method	PoE++
Max. power consumption	3W (Without PoE output)
PoE input	(1) PoE++, 50V DC, Max. 1.2A
PoE output	(1) PoE+, 48V DC, 0.72A
ESD/EMP protection	Air: ±8kV, contact: ±4kV
LED	Whte
Ambient operating temperature	-10 to 40° C (14 to 104° F)
Ambient operating humidity	5 to 95% noncondensing
U-PoE++
Dimensions	106 x 63 x 34 mm (4.2 x 2.5 x 1.3")
Weight	210 g (7.4 oz)
Output voltage	48V DC @ 1.25A
LAN activity indicator	No
Gigabit LAN port	Yes
Remote reset capability	No
Reset button	No
Rated voltage	100 - 240 V DC, 50/60 Hz
Input current	1.3A @ 120V AC 0.75A @ 230V AC
Inrush current	<100A peak @ 120V AC <200A peak @ 230V AC
Efficiency	85+%
Output ripple	1% max.
Switching frequency	65 kHz
Line regulation	≤ 1%
Load regulation	≤ 3%
2-pair powering	No
4-pair powering	Pins 1, 2, 4, 5 (+) and 3, 6, 7, 8 (-)
AC connector	IEC-320 C6
Data In / PoE	RJ45 shielded socket
Surge protection	Difference and common mode
Clamping protection	11V data, 60V power
Max. surge discharge	1500A (8/20 μs) power
Peak pulse current	36A (10/1000 μs) data
Shunt capacitance	< 5 pF dla danych
Response time	< 1 ns
Power method	Universal AC input, 100—240V AC, 50/60 Hz
Power supply	AC/DC
Supported voltage range	100—240V AC
Max. PoE+ wattage per port by PSE	60 W
Ambient operating temperature	0 to 40° C (32 to 104° F)
Storage temperature	-30 to 70°C (-22 to 158° F)
Ambient operating humidity	10 to 95% noncondensing