Mean Well DUPS40 DIN Rail Type Uninterruptible 24V 40A DC-UPS Module

Mean Well DUPS40 DIN Rail Type Uninterruptible 24V 40A DC-UPS Module

Marca: Mean Well

Código de producto: MW-DUPS40

Número de catálogo: 9182

Garantía (meses):

Precio

107,08 zł

131,71 zł IVA incluido

favoriteAñadir a la lista de deseos

Descripción

The UPDS40 is a 40A DIN rail type DC-UPS module, and it is paired with a power supply and an external battery to achieve the backup function. When the AC mains fails or is interrupted, the load will be immediately connected to the battery pack to avoid interruption and to ensure the continous operation of the entire system (the operating time depends on the capacity of the battery pack).

The main features of DUPS40 include: fast installation, suitability for 24V battery pack and various capacities of 4Ah ~ 135Ah, 2A battery charging current, low voltage disconnect for battery protection and more. The product is suitable for use in data centers, security systems, emergency lightning, wireless communication UPS, central monitoring systems etc.

Specifications

DC UPS input
DUPS40
Normal input voltage	24 V DC
Input voltage range	24 - 29 V DC
Rated current	40 A
DC UPS output
Voltage range	21 - 29 V DC
Discharge current range	0 - 40 A
Charging current	2 A
Battery
Normal battery voltage	24Vdc ( 2 x 12Vdc in series or 1 x 24Vdc)
Battery type	Lead-acid battery
External battery capacities	4 - 135 Ah
Protection
Battery polarity	Protected by internal detection, No Damage, recovers automatically after fault conduction is removed
Short circuit	This protection only works when batteries are not connected, No Damage. External fuse is recommended when batteries are connected.
Over discharge current	42~46A,After 3 sec., unit will cut-off battery discharging by relay
Battery deep discharge	Cut-off battery discharging by relay
Function
Relay contact ragings (max)	30VDC/1A resistive load
DC BUS OK	Relay contact : Short when DC voltage between 21~29V(±2%), relay contacts LED(Green) : DC BUS OK : light ; DC BUS fail : dark
BATTERY FAIL	Short when battery voltage falls below 22V(±2%) or battery failure is observed through the battery test function, relay contacts LED(Red) : Battery over-discharge warning or battery broken : light ; Battery OK : dark
BATTERY DISCHARGE	Relay contact : Short when battery in discharge condition, relay contacts LED(Yellow) : light : Battery discharging ; dark : Battery is not discharging or discharging current < 2.0A
Environment
Cooling	Free air convection
Working temperature	-30 ~ +70? (Refer to "Derating Curve")
Working humidity	5 ~ 95% RH non-condensing
Others
MTBF	1376.5K hrs min. Telcordia SR-332 (Bellcore) ; 499.5K hrs min. MIL-HDBK-217F (25?)
Dimensions	63 x 125.2 x 113.5mm (WHD)