Uplink GPON OLT GP4402 4x PON 4xGE 2x SFP + GPON modules

Uplink GPON OLT GP4402 4x PON 4xGE 2x SFP + GPON modules

Marca: Uplink

Código de producto: UPLINK-GP4402-SFP

Número de catálogo: 7122

Garantía (meses):

Dispositivo retirado de producción. Sustituto: Uplink GP4202 SFP

Producto archivado

Descripción

Uplink GP4402 is an OLT terminal adapted for use in the GPON network. It is equipped with 4 PON ports and 6 uplink ports, including 4 gigabit Ethernet ports and 2 SFP + slots (10 Gb / s). Additionally, the device has Console and Aux (Ethernet) ports. OLT fully supports multicast and IGMP Snooping, perfect for delivering triple play services.

The maximum split per port is 1:128, so theoretically, when the GP4402 is fully loaded, 512 subscribers can be connected. The throughput per port is 2.5 Gb / s downstream and 1.25 Gb / s upstream. Approximately the device has the functionality of a managed switch, supports DHCP (server / relay / snooping), static routing, ARP proxy, RIP v1 / v2 and OSPF v2. Management is done via the graphical web interface or the command line. The interface is clear and easy to use.

The terminal has been tested by us to work with ONU / ONT terminals from other manufacturers!

Instructional video on OLT configuration and ONT connection (on the example of Huawei HG8245H): GP4402 configuration

Web configuration manual
Configuration examples

Warning! The set does not include GPON module!

Firmware

Version V2.1.6R (April 2021)

Warning! After upgrading to version 2.0.7R or higher, the default login information changes to:
Login: admin
Password: Xpon@Olt9417#

The most important features:

OLT terminal for GPON network;
web graphic interface;
4 PON ports;
4 GPON SFP module included;
max split to PON port: 1:128;
bandwidth per PON port: downstream: 2.5 Gb / s, upstream: 1.25 Gb / s;
4 gigabit Ethernet ports (uplink);
2 SFP + slots (uplink);
full multicast and IGMP Snooping support;
DHCP server / relay / snooping, static routing (RIP v1 / v2, OSPF v2).

Specification:

Uplink GP4402
Uplink ports	4 gigabit Ethernet ports 10/100/1000 Mb / s 2 SFP + slots
PON ports	4 sloty Maks. split 1:128
Management port	1 AUX port (RJ45) 1 console port (RJ45)
Maximum transmission range	20 km
Capacity PON port	Downstream: 2488 Mb/s Upstream: 1244 Mb/s
Wavelength	Tx: 1490 nm Rx: 1310 nm
Transmitting power (Tx)	For class B + module: -2 ~ 2 dBm For class C + module: 3 ~ 7 dBm
Reception sensitivity (Rx)	For class B + module: -28 dBm For class C + module: -30 dBm
Management method	SNMP, Telnet, CLI, Web
Management functions	Port monitoring and configuration Layer2 management such as VLAN, Trunk, RSTP, IGMP, QoS PON management functions: DBA, ONU authorization, ACL, QoS ONU configuration and management Alarm management
Layer2 switch	16K MAC addresses VLAN Up to 4096 VLANs VLAN tag / untag, VLAN transparent transmission QinQ Storm control based on port Port isolation Bandwidth limit per port 802.1D and 802.1W Static LACP QoS based on port, VIC, TOS and MAC address Access Control List (ACL) IEEE 802.x flow control Port statistics and monitoring
Multicasts	IGMP Snooping 256 grup IP Multicast
DHCP	DHCP Server DHCP Relay DHCP Snooping
Layer 3 routing	ARP Proxy Static routing Subnet routes: 512 Host routes: 1024
GPON functions	Tcont cares Gemport traffic ITU-T 984.x ONU auto-discovery / link detection / remote soft update VLAN division User separation Broadcast storm resistance Port isolation ACL / SNMP RSTP, IGMP Proxy
Power method	Built-in AC / DC power supply
Operating temperature	Od -10 do 55 °C
Storage temperature	Od -40 do 85 °C
Permissible air humidity	5%-90% non-condensing