-
6,47 Kč netto
The offered product is a unique voltage converter with numerous functions that distinguish it from competing solutions. The input voltage is 24 V DC, the maximum input current is 5 A (power approx. 120 W). The converter has three outputs with the following voltages: 12 V, 24 V and 48-56 V (the possibility of switching the voltage 48 or 56 V). The device can work as a buffer with battery power. The input voltage of the battery is 12 V, so you do not need to connect the batteries in series to obtain a higher voltage. The converter has a built-in battery charger and protection against overdischarge.
The product can be managed via LAN and the Internet - the user gains access to information about the lack of mains power, battery voltage or currents at individual outputs. It is also possible to remotely reset or disconnect the outputs. The device has a built-in temperature sensor, additionally allows you to connect an external sensor via the 1Wire port. It is also equipped with a digital input to which additional sensors can be connected.
The most important features:
- input voltage 24 V DC;
- possibility of battery operation, 12 V DC input;
- outputs: 12 V, 24 V and 48 - 56 V;
- protection against deep battery discharge;
- battery charging;
- management via LAN or internet;
- input for sensors: digital and 1Wire.
Specification:
Manageable converter | |
Rated power | |
---|---|
Total | 100 W |
Recommended supply voltage | 24 V |
Output current at 24 V | 4 A |
Output current at 48 V | 2 A |
Output current at 12 V | 1,5 A |
Output current OutT | 0,5 A |
Maximum power | |
Total | 120 W |
Output current at 24 V | 5 A |
Output current at 48 V | 2,5 A |
Output current at 12 V | 2 A |
Output current OutT | 0,5 A |
Recommended work with load on all outputs | |
Output current at 24 V | 1,8 A |
Output current at 48 V | 0,7 A |
Output current at 12 V | 1 A |
Output current OutT | 0,2 A |
Other parameters | |
Protection on input | 6 A |
Battery cut-off voltage | ±11 V |
Permissible working temperature | From -20 to 40 °C |
Dimensions |
45x90x110 mm Width 147 mm with handle |
Housing | 1U height, adapted to a rack cabinet |
Weight |
490 g (460 g without handle) |