-
0,25 € netto
PowerSinus 5000 combines the functionality of an UPS, inverter, universal mains rectifier and automatic mains switch (AC). It is an efficient (efficiency approx. 88%) and inexpensive solution. It enables multi-stage charging with power factor correction and a clean sine wave at the output. It is distinguished by a high value of impulse power and a high charging current - 30 A. Thanks to the built-in correction of the charging power factor, the device uses 20% - 30% less energy from the AC input than in the case of competing models.
The continuous power is 5000W, the instantaneous power is about 300% of the nominal power (15000W), it can be kept for about 20 seconds. The offered product can work as a network switch in the "mains / battery" mode (when the AC supply is cut off or falls below the allowable range, the load is transferred to the inverter output - battery, and after the mains supply is restored, the load returns to the mains) or "battery / mains "(maximum use of power from external power sources such as renewable energy systems).
The status of the device is indicated by signaling in the form of LEDs. It is also possible to equip PowerSinus with LCD control panel. The main application of the product is to power high-power devices (circular saws, drills, compressors, etc.), office equipment (computers, monitors, shredders, etc.), home appliances (vacuum cleaners, lighting, sewing machines, etc.), industrial equipment (halogen lamps , compressors, motors, etc.) and home entertainment devices (TV sets, set-top boxes, etc.).
The most important features:
- continuous power 5000 W;
- instantaneous power 15,000 W;
- battery input voltage 24 V;
- power consumption at rest is about 4% of continuous power;
- uninterruptible power supply functionality;
- inverter functionality;
- universal mains rectifier;
- automatic AC network switch;
- high efficiency - 88%.
Specification:
PowerSinus 5000 | |
Inverter output parameters | |
---|---|
Continuous power | 5000 W |
Instantaneous power (20 seconds) | 15000 W |
Ability to work with a power engine | 5 HP |
Waveform of output voltage | Pure sine |
Inverter efficiency | 88% |
PFC | 0,9 - 1,0 |
Rms output voltage | 230 V AC |
Adjusting the output voltage | ±10% RMS |
The output frequency | 50 ± 0,3 Hz |
Short circuit protection | Yes, with current limiter function after 1 s |
Mains / battery transfer time | 10 ms (max.) |
THD | < 10% |
Input parameters | |
Voltage | 24 V DC |
Minimum input voltage | 20 V DC |
Low voltage signaling | 21 V DC / 22 V DC |
Undervoltage cut-off | 20 V DC / 21 V DC |
Signaling and overvoltage cut-off | 32 V DC |
Maximum voltage | 31 V DC |
Low Battery voltage recover | 26 V DC |
Sleep mode threshold | > 25 W in "Power Saver" mode on |
Rectifier | |
Input voltage | 194 - 243 V AC / 164 - 243 V AC |
Input frequency range | 47 - 55 ± 0,3 Hz / 43 ± 0,3 Hz dla 50 Hz |
Output voltage | Depends on the battery |
Charging current (230 V AC) | 30 A |
Overcharge protection | 31,4 V |
Desulphurization | 15,5 / 4 hours |
Remote control | No |
Bypass and security | |
Input voltage waveform | Sine wave (power grid or generator) |
Nominal voltage | 230 V AC |
Low voltage error | 184 V / 154 V ± 4% |
Restart after low voltage | 194 V / 164 V ± 4% |
High voltage error | 253 V ± 4% |
Restart after high voltage | 243 V ±4% |
Maximum input voltage | 270 V AC |
Input frequency | 50 Hz |
Low frequency error |
47 / 40 ± 0,3 Hz at 50 Hz 57 / 58 ± 0,3 Hz at 60 Hz |
Ponowne w??czenie po niskim napi?ciu |
48 / 45 ± 0,3 Hz at 50 Hz 58 ± 0,3 Hz at 60 Hz |
High frequency error |
55 ± 0,3 Hz at 50 Hz 65 ± 0,3 Hz at 60 Hz |
High frequency restart |
54 ± 0,3 Hz at 50 Hz 64 ± 0,3 Hz at 60 Hz |
Fuse (230 V AC) | 40 A |
General features | |
Mounting | Wall or horizontal mounting |
Dimensions | 598 x 218 x179 mm |
Weight | 44 kg |
Size of the package | 800 x 360 x 350 mm |
Gross weight | 46 kg |
Display | LED |