-
0,26 € netto
SinusPRO-800W is a device with the necessary protections to work with solar regulators and photovoltaic devices. It also has the functionality of a 12 V DC / AC inverter, UPS backup switch, mains voltage stabilizer (AVR) and battery charger. The rated power is 500 W and the battery charging current is 10 A. The device does not have a built-in solar regulator, it must be purchased separately.
The offered product is used for uninterrupted power supply to electronic devices. If the voltage supplied from the mains or the sinusPRO solar regulator fails, it will automatically switch to battery power. Switching power is very fast, it effectively protects connected devices.
The inverter produces an alternating voltage with a sinusoidal wave, identical to that in the power grid. Thanks to this, it is possible to power devices equipped with electric motors and transformers, such as electric tools, pumps and low-power household appliances. There is no risk of damage to the powered equipment when using square wave inverters.
The most important features:
- possibility of connecting a solar regulator - necessary security measures to work with photovoltaic devices;
- DC / AC converter (12 V);
- UPS uninterruptible power supply;
- voltage regulator and battery charger;
- rated power 500 W;
- instantaneous (overload) power 800 VA;
- charging current 10 A;
- sine wave output voltage.
Specification
sinusPRO 800W | |
Rated power (continuous) | 500 W |
Overload power (instantaneous) | 800 VA |
Battery voltage | 12 V |
Rectifier (charging current) | 10 A |
PV charging voltage |
~ 18V 12 - 25 V |
Solar regulator | Brak |
Automatyczny regulator napi?cia sieciowego (AVR) | 140 - 275 V AC |
Current consumption without load | 0.3 - 1.5 A. |
Admissible range of supply voltage | Switching to battery power supply occurs when the mains voltage is lower than 160 V (± 5 V) or higher than 260 V (± 5 V) |
Supply voltage frequency | 45 - 65 Hz |
The frequency of the UPS output voltage | 50 Hz (± 0,5 Hz) |
Output voltage range |
Mains voltage regulator AVR: 204 - 240 V UPS (battery): 230 V (± 3%) |
Overload protection (battery powered) | In the event of an overload of 110% - 130%, the power is disconnected after 30 seconds. If the overload is greater than 130%, the power is disconnected immediately. |
Overload protection (mains supply) | The device warns of an overload until the fuses blown. |
Permissible humidity | 10%-90% RH |
Permissible operating temperature | From 0 to 40 °C |
Dimensions | 260x150x280 mm |
Weight | 6 kg |