Flatpack S 48V 1000W HE Rectifier

Flatpack S 48V 1000W HE Rectifier

Marca: Eltek

Código de producto: ELTEK-241115.105

Número de catálogo: 4187

Garantía (meses):

Producto archivado

Descripción

A small rectifier (power supply) dedicated to small and medium-sized telecommunications applications. The device offers high efficiency, reliability and protection of the output with the OR-ING diode, it is closed in a housing with a depth of 210 mm. The rectifier is installed in the power supply unit together with the Smartpack 2 controller. Suitable for applications requiring 2 to 3 kW, requires minimal work space, and has low heat emission.

The most important features:

small and short housing;
power density up to 26 W / CU IN;
high performance;
protection of the output with the OR-ING diode;
hot-plug technology;
coding modules with different voltages and powers.

Specification:

Input parameters
Flatpack S 48/1000 HE
Voltage range (nominal)	185 - 270 VAC
Voltage range (maximum)	85 - 300 VAC
Frequency	45 - 66 Hz
Maximum current, at nominal input and full load	5,9 Arms
Power factor	> 0.99 at 50% or greater load
Protections	Fuse Shutdown above 305 VAC
Output parameters
Nominal voltage	53,5 VDC
Voltage range	43,5 - 57,6 VDC
Maximum power	1000 W
Power at 85 V_AC	440 W
Maximum current, at nominal input and full load	20,9 A (at 48 VDC)
Current split (Load 10% - 100%)	±5% of the maximum current for a load from 10% to 100%
Static voltage regulation (10% - 100% load)	±0,5%
Dynamic voltage regulation	± 5.0% for 10-90% or 90-10% load changes, regulation time <50ms
Back-up time, full load	> 20ms, output voltage> 41 VDC
Noise	<150mV ptp, bandwidth 30Mhz
Protections	OR-ING diode short circuit protection protection against high temperature
Others
Efficiency at 95.5% nominal voltage	95,5%, > 95% at 40 - 100% load
Insulation	3.0 kVAC - input and output 1.5 kVAC - input and ground 710 VDC - output and ground
Alarms, red LED on	Shutdown: from low supply voltage, high or low temperature, high output voltage. Damage to: rectifier, fan or CAN communication bus; low voltage alarm.
Warning: yellow LED on	Rectifier in power limitation, battery current limit active, input voltage out of range, blinking on overvoltage shutdown.
Green LED on	Normal mode (module working, no problems)
Noise	< 46 dBA at nominal voltage and full load
MTBF (Telcordia SR-332 Edition I method III (a))	> 350000 (at ambient temperature : 25 °C)
Working temperature	From -40 to 85 °C, permissible humidity 5% -95% RH non-condensing
Storage temperature	From -40 to 85 ° C. acceptable humidity 0% -99% RH non-condensing
Dimensions / weight	72x41,5x210 mm < 1 kg
Standards
Electrical safety	UL 60950-1 3 editon, EN 60950-1 3 edition
EMC	ETSI EN 300 386 V.1.4.1 EN 61000-6-1 / -2 / -3 / -4 / -5 FCC part15 Subsection109
Environmental	ETSI EN 300 019: 2-1 (class 1,2), 2-2 (class 2,3), 2-3 (Class 3,2) Compatible with ROHS