Convertidor de Tensión sinusPRO-1000W 12V 700/1000W

Convertidor de Tensión sinusPRO-1000W 12V 700/1000W

Marca: Volt

Código de producto: VOLT-3SP100012W

Número de catálogo: 3311

Garantía (meses):

Precio

115,85 €

142,50 € IVA incluido

favoriteAñadir a la lista de deseos

Descripción

SinusPRO-1000 W is a device that combines the functionality of a backup power supply, DC / AC inverter, UPS switch, mains voltage stabilizer (AVR) and a battery charger. It is equipped with an AC / SOLAR operation priority switch, it has appropriate protections, thanks to which it can cooperate with a solar regulator and photovoltaics. The input voltage is 12 V and the output power is 700 W (1000 W overload power).

The offered product is used for uninterrupted power supply to devices. The output current is sinusoidal, not square. Thanks to this, it is possible to power sensitive systems without the risk of damaging them. In the event of a power failure, sinusPRO automatically switches to solar or battery power. It is possible to mount the product on the wall.

Warning! SinusPRO-1000 W has no built-in solar regulator!

The most important features:

DC input voltage: 12V;
continuous output power 700 W (1000 W instantaneous);
UPS emergency switch functionality;
the ability to work with a solar controller and photovoltaics;
AC / SOLAR work priority switch;
functionality of the mains voltage stabilizer;
battery charger.

Specification

sinusPRO-1000 W
Rated power (continuous)	700 W
Overload power (instantaneous)	1000 W
Battery voltage	12 V
Rectifier (charging current)	20 A
PV charging voltage	~36 V 12 - 50 V
Solar regulator	Not included
Automatic mains voltage regulator	140 - 275 V AC
Current consumption without load	From 0,3 A to 1,5 A
Admissible range of supply voltage	Switching to battery operation takes place when the mains voltage is lower than 160 V or higher than 260 V. Accuracy: 5 V
Supply voltage frequency	45 - 65 Hz
The frequency of the UPS output voltage	50 Hz (± 0,5)
Output voltage range	Mains voltage regulator AVR: 204 - 240 V UPS and battery: 230V (± 5%)
Overload protection (battery powered)	In the event of an overload of 110% -130%, the power is disconnected after 30 seconds. If the overload is greater than 130%, the power is disconnected immediately.
Overload protection (mains supply)	The device warns of an overload until the fuses blown.
Permissible air humidity	10%-90% RH
Permissible working temperature	From 0 to 40 °C
Dimensions	310x170x330 mm
Weight	9 kg