-
0,25 € netto
The ZM48B6A-300A is a switching power supply with an output voltage of 48 V. The devices in this series are distinguished by state control and extensive signaling. The power supply has a overdischarge switch (RGR) to protect the connected batteries against excessive discharge. Thanks to the temperature probe, it regulates the output voltage depending on the ambient temperature.
The offered product can work with batteries of various capacities, provides the appropriate current and charging time. The maximum output current is 6 A and the output power is 300 W.
Warning! Illustrative photo!
The most important features:
- input voltage 230 V AC or 220 V DC;
- 48 V output voltage;
- output current 6 A;
- 300 W output power;
- condition control;
- separate signaling of emergency states of the backup power source (relays + LED diode);
- separate signaling of failure states of the main power source;
- work in automatic charging mode;
- protection against battery deep discharge (RGR);
- battery circuit fuse.
Specification
ZM48V6-300A | |
Input | |
---|---|
Voltage |
230 V AC (184 - 253 V AC) 220 V DC (165 - 297 V DC) |
Supply voltage frequency | 47 - 53 Hz |
Power factor | 0,95 |
Output | |
Characteristic | UPI |
Stabilization of the output voltage | 0,5% |
Voltage | 48 V |
Current | 6 A |
Power | 300 W |
Mechanical parameters | |
Weight | 1,3 kg |
Cooling | Active |
Power Factor Correction (PFC) | Yes |
External dimensions | 66x111x203 mm |
Compliance with standards | |
Construction, properties, functions |
PN-T-83101:1996 PN-EN 61204:2001+A1:2002 |
Electrical safety |
PN-EN 60950:2007+A1:2011 kl. I PN-EN 61204-7:2009 |
EMC emission |
PN-EN 55022:2011 B class PN-EN 61000-3-2:2007 PN-EN 6100-3-3:2011 |
EMC immunity |
PN-ETSI EN 300 386:2002 PN-EN 50130-4:2012 PN-EN 61204-3:2006 |
General | |
Efficiency | up to 87% |
Permissible working temperature | From -25 to 55 °C |
Protection level | IP20 |