Contacto
closeContacto
RMADetalles de envíoPruebas de productos Términos y condiciones

Contacto:

alternate_emailtienda@cdr.pl

call+48 32 750 5003

lun - vier 9:00 - 17:00

Contacto

Cuenta
closeIniciar sesión
Iniciar sesión

Nuevo cliente?

Crear cuenta
Carrito
closeCarrito
La cesta está vacía favoriteWishlist
Eltek Flatpack2 Rectifier Module 48v 1800W
Marca: Eltek
Código de producto: ELTEK-241115.001
Número de catálogo: 4443
Garantía (meses):
Producto archivado
Descripción

An additional module (rectifier) for the Flatpack2 gym, with a power of 1800 W. The device is adapted to work with systems of various sizes, thanks to digital communication with Smartpack, its implementation has been simplified and flexibility has been increased. The 23" rack can accommodate 5 products, while the 19" rack can accommodate 4. The device can be used for: wireless, fiber optic and fixed telephony; access and broadband systems.

The most important features:

  • high efficiency while maintaining a small size;
  • digital control;
  • cooling;
  • unique "plug-and-play" connection;
  • global approvals: CE, UL and NEBS certified.

Specification:

Prostownik Flatpack2 48/1800
Input parameters
Voltage 85 - 290 V AC (nominal 185 - 275 V AC)
Frequency 45 - 66 Hz
Maximum current 10,7 A rms maximum for nominal input voltage and full load
Power factor > 0,99 at a load of 20% or more
Protections

fuse on both lines

disconnection above 290 V AC

Output parameters
Voltage 53.5 V DC (control range): 43.5 - 56 V DC)
Power 1800 W at nominal input voltage
Maximum current 37,5 Amps at 48V DC and nominal input voltage
Split current ±3%
Static voltage regulation ±0,5% at load 10% - 100%
Dynamic voltage regulation ±5,0% for 10-90% or 90-10% load changes, control time <50 ms
Backup time > 20 ms; output voltage> 43.5 V DC with a load of 1500 W
Interference and noise

< 100 mV ptp

30 MHz bandwidth

< 0,96 mV rms psophometric

Protections

Overload shutdown

blocking diode

short circuit protection

high temperature protection

Other
Efficiency 92%, minimum 91% at load 40-90%
Insulation

3.0 kV AC - input and output

1.5 kV AC - input and ground

0.5 kV DC - output and ground

Alarms

Low power shutdown

high temperature shutdown

damage to the charger

shutdown at output overvoltage

fan error

low voltage (43.5 V)

CAN bus error

Warnings

Rectifier in power limitation

battery current limit active

too high voltage

flickering when overvoltage cut-off

no communication with CAN

LED signaling

Green LED: the device works, no problems

Yellow LED: rectifier warning

Red LED: rectifier error

Working temperature From -40 to 70 °C
Storage temperature From -40 to 85 °C
Cooling active, 2 fans (airflow from front to back)
Fan speed Regulated by temperature and load
MTBF >250,000 hours Telecordia SR-332 1st Edition Method III (a)
Noise level <50 dBA at nominal voltage and 70% load (ambient temperature <30 ° C)
Permissible humidity

Operation: 5% - 95% RH non-condensing

Storage: 0% - 99% RH non-condensing

Dimensions 109x41,5x327 mm
Weight 1,8 kg
Standards
Electrical safety

IEC 60950-1

UL 60950-1

CSA 22,2

EMC

ETSI EN 300 386 V.1.3.2

EN 61000-6-4

EN 61000-6-3

EN 61000-6-2

EN 61000-6-1

Telcordia NEBS GR1089 CORE

Harmonics EN 61000-3-2
Environmental

ETSI EN 300 019-2

ETSI EN 300 132-2

Telcordia NEBDS GR63 CORE Zone 4

RoHS Compliance (Pending)